This insert is designed to fit inside the following game boxes:
- Warhammer Invasion: The Card Game
- Lord of the Rings: The Card Game (only older editions, not the new small core box edition, see LGC-003 for small box core solution)
- Call of Cthulhu: The Card Game
- Star Wars: The Card Game
- A Game of Thrones: The Card Game v1
- Android Netrunner: The Card Game (only older editions, not the new small core box edition, see LGC-003 for small box core solution)
- Original Thunderstone (big box) & Thunderstone Advance (big box)
- High Command, Hordes/Warmachine (core box)
- Doomtown Reloaded (core box)
- Ashes: Rise of the Phoenixborn
This insert is similar in design to our LGC-001, but provides 2 full lanes that are 100mm wide and two small, adjustable center lanes that are also 100mm wide, but store cards sideways. The two smaller center lanes are adjustable in terms of layout. You can configure them to place a small bit compartment in the center of the insert, or against the insert wall. The insert is 70mm high (for those FFG sleeves. These design features allow the use of FFG sleeves and euro sleeves.
Also, check out the LGC2-SM-DIVA and LGC2-SM-DIVB center lane dividers. These smaller dividers offer and alternative to our standard dividers and are placed in the same orientation as the standard dividers for this insert. With this option you can divide the center lane horizontally, instead of vertically.
Product Notes
- This v20 design supports 3mm acrylic dividers. Units shipped prior to May 1, 2020 used 2.286mm dividers.
- This insert measures 286.5mm x 286.5mm x 70mm high (11.28″ x 11.28″ x 2.75″) and provides four (4) organizational lanes for horizontal card storage. There is zero clearance at the top in standard LCG game boxes for rulebooks, etc. If you have the “new” FFG LCG box, this insert will rise 1mm above the top of the box. It has ~15mm clearance at the top of Thunderstone boxes for the game board, rulebooks, etc. Finally, this insert has ~5.62mm clearance when placed in a big High Command box. This insert allows for the storage of Doomtown, Doomtown player boards, and rulebooks (it all fits). With Ashes, there is zero clearance at the top and you will experience 1-2mm of lid lift. It’s not really noticeable.
- This insert has wide lanes due to the arrangement of lanes. Recommended sleeves include Ultra Pro Deck Protector, Mayday Premium, Dragon Shields, and FFG sleeves.
- This insert has 718mm of card lane storage. It can store ~2393 unsleeved cards or ~1432 Mayday Premium sleeved cards (.50mm per card) or ~1324 Ultra Pro Deck Protector sleeved cards (.54mm per card). Keep in mind each acrylic divider will also use 3mm of card lane space. The values used for the card thickness estimate = .3mm.
- Image is of prototype using 3mm Baltic Birch. Production insert uses HDF wood product.
- This insert is constructed of HDF (wood product) and is natural colored. HDF does not contain a wood grain as it is a constructed wood product.
- Includes fifteen (15) clear acrylic dividers (model LGC-DIV-004). Additional divider packs of type LGC-DIV-004 should be used. The DIV-004 design allows for the attachment of Post-it Durable Hanging File Folder Tabs (adhesive) for divider notes. We also offer two smaller dividers designed to allow horizontal use in the center lane of this insert: LGC2-SM-DIVA and LGC2-SM-DIVB center lane dividers.
- Insert assembly requires some wood glue and about 15 minutes of assembly time. I recommend Sobo Craft glue or another comparable quick setting, tacky glue.
- This is a third-party, non-licensed product.
David W G. (verified owner) –
This is a good insert, made of quality materials with a good design. There are just a few execution problems. First, there are no instructions inside the insert pack. No notes to check online either but I checked online and found the instructions. There was even a Watch it Played video which was great. Except that the insert didn’t match the video or the written instructions on the site.
The actual insert was better — it included a center portion which allows you to put even more cards in the insert since the box isn’t capable of having 3 rows of cards (not wide enough). Unfortunately, it was impossible to know how those center portions were constructed by means of the video or the instructions. The pictures of the actual insert did show it in place, but not in enough detail to know which 2 of the 4 possible slots to put the cross slats in. I managed to guess correctly but really I was lucky.
Even though this insert is not hard to construct, and even though I’m pretty experienced, and even though it’s a great insert once constructed, it would be nice if a set of printed instructions (1 or 2 pages would do) was included in the package, and that those instructions would match the actual item being constructed, and that there would be pictures showing where the cross slats should be placed. They should in fact be placed as much in the center as possible so as to make the center portion as small as possible. This allows both sections on the middle top and bottom to be wide enough to place more cards.
(0) (0) Watch Unwatch