This insert is designed to fit inside the core Legendary Marvel Deckbuilding box (not Villains or Encounters). Just one insert can easily store Legendary and two expansions. This insert is designed for use with larger standard sleeves such as FFG and Dragon Shields. If you don’t sleeve, you should have a look at the LEG-002 insert. It provides an additional row of storage.
Product Notes
- This insert provides three (3) organizational lanes for vertical card storage. There is enough clearance at the top for rulebooks. If you store your game board in the box, the top will not close fully, but it is well supported by the board.
- External dimensions: 280mm x 280mm x 95mm high (11.02″ x 11.02″ x 3.74″ high) and provides 1.3mm of clearance for rulebooks at the top. The game board is 12.7mm thick so you will have ~ 11.4mm of lift if you store the board in the box.
- This insert has 834mm of card lane storage. It can store ~2875 unsleeved cards or ~1668 FFG Standard sleeved cards (.50mm per card) or ~1573 Dragon Shield sleeved cards (.53mm per card). Keep in mind each acrylic divider will also use 2.286mm of card lane space. The values used for the card thickness estimate = .29mm.
- This insert has super wide lanes to allow for the use of larger sleeves such as FFG and Dragon Shields. Recommended sleeves for the cards include FFG Standard, and Dragon Shields. When using tall sleeves (FFG Standards), you should store cards between dividers with spare space allowing the cards to recline slightly so that the sleeves sit below the top of the insert. FFG sleeves are ~2.2mm taller than the insert, but store fine if allowed to recline at a very slight angle within the dividers. Dragon Shields are .1mm taller than the insert top. They store perfectly with minimal reclining.
- Image is of prototype using 3mm Baltic Birch. Production insert uses HDF wood product.
- This insert is constructed of HDF (wood product) and is natural colored. HDF does not contain a wood grain as it is a constructed wood product.
- Includes fifteen (15) clear acrylic dividers (model LEG-DIV-001). Additional divider packs of type LEG-DIV-001 should be used. The DIV-001 design is a t-shirt divider.
- Insert assembly requires some wood glue and about 15 minutes of assembly time. I recommend Sobo Craft glue or another comparable quick setting, tacky glue.
- This is a third-party, non-licensed product.
0 reviews with a 2-star rating
There are no reviews with a 2-star rating yet