CONTACT US
INSIDERS CLUB ZINE
LEG-005 Insert for Secret Wars
$24.14
This insert is designed to fit inside the Legendary Secret Wars box (or other boxes of similar size) and features two full rows and one short row for card storage.
Out of stock
This insert is designed to fit inside the Legendary Secret Wars box or other boxes of similar size. This insert features two full rows and one short row for card storage. Due to the box dimensions, there is also a small compartment that is not large enough for dividers. You can store a handful of cards in this compartment at an angle or store other bits.
This insert includes fifteen (15) acrylic dividers. If you intend to store each card group individually, you will want to grab a couple of extra packages of dividers. You can get by with one additional package if you group masterminds and perhaps henchmen together.
Product Notes
- This insert provides two (2) full and one (1) smaller organizational lanes for horizontal card storage. There is just enough clearance at the top for the rule sheet.
- This insert is lovingly crafted with laser power using a 3mm HDF wood product and is natural colored. HDF does not contain a wood grain as it is a constructed wood product.
- Includes fifteen (15) clear acrylic dividers (model LEG-DIV-005). Additional divider packs of type LEG-DIV-005 should be used.
- This insert can accommodate sleeved or unsleeved cards.
- Insert assembly requires some wood glue and about 20 minutes of assembly time. I recommend Sobo Craft glue or another comparable quick setting, tacky glue.
- This kit can ship in a USPS Priority Mail Flat Rate envelope if purchased alone.
- This is a third-party, non-licensed product. All registered marks are the property of their respective owning entities.
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 12.5 × 9.5 × .45 in |
Build Instructions
Rick R. (verified owner) –
Good quality, easy* to assemble, happy with the product. I’ve got three of them. 1 star off for the frustrating part of putting on the bottom plate (it doesn’t slot in easily) and for the card storage areas not being slightly wider when there is room to do so by shrinking the center area just a bit. As it stands, my cards in super cheap penny sleeves are a squeeze to fit in, since they are slightly taller than the space provided. But if you’ve got smaller sleeves, this is a 5 star product.
(0) (0) Watch Unwatch
Henry S. (verified owner) –
The stock “insert”, if you want to call it that, does make the most of the space given, but leaves much to be desired. Unfinished cardboard, flimsy, just cheap looking.
The old divider can be gently pulled out and saved, if you are concerned about a safety net to go back to. It’s just held in by a thin line of hot glue.
This one looks much better and much nicer to use with the acrylic dividers. I used a combination of the acrylic and some of the stock dividers, until I print up custom ones, to divide the major groups. Fits Ultra Pro Deck Protectors just fine.
(0) (0) Watch Unwatch
Shawn D. (verified owner) –
Very disappointed with this purchase. The stock cardboard divider is a little tight on FFG sleeves, so I figured I would buy these inserts. I knew I was going to lose storage space overall, but I wanted the pressure taken off the ends of the cards. Turns out these inserts provide even less width for the cards. To make things worse I had to cut out the stock cardboard divider, so I can’t go back.
(0) (0) Watch Unwatch
Anonymous –
Will this fit both secret wars volumes w/ FFG sleeves?
(0) (0) Watch Unwatch
Admin Bobby G. –
Definitely not. The images for this insert show the cards unsleeved from Secret Wars I divided logically in groups. The space provided accounts for sleeves, but there is not much room left unfortunately.
(0) (0)