This organizer is designed to fit inside the versatile Artist Sketch Case available from Hobby Lobby in the U.S. This wooden art case can be carried as a briefcase or satchel and includes an upper swing-out compartment for storage of boards and rulebooks. 

This organizer excels at storing Dominion kingdom cards, as they require very little space per set of Kingdom cards. This design has double inner walls which allows dividers to be placed side-by-side, unlike the ASB-002, which has single inner walls.

The insert fits into the empty case, but the upper storage compartment should be removed from the case since this case has such a high profile. You can store boards, small mats, rulebooks, and more right on top of the insert.

The Artist Sketch Case is famous for being inexpensive.  It is also famous for having wildly different interior sizes.  This organizer has been designed to support the smallest size case interiors that we have found or been informed of by customers.  In some cases this means that the organizer will be smaller than the interior offered by your case and may slide around a bit when handled.  A small amount of movement in the case should be fine, but you can always optionally drop some glue on the bottom of the case and glue the organizer into the case to eliminate any movement.

Product Notes

• This v20 design supports 3mm acrylic dividers.  Units shipped prior to March 2020 used 2.286mm dividers.
• This insert measures 100mm high and provides five (5) organizational lanes for vertical card storage and one (1) smaller lane for bit storage. The interior divider walls of this insert are ~6mm (2 x 3mm) so that dividers can be placed side-by-side, allowing for many more dividers in this insert.   As a consequence of using 6mm inner lanes, bit boxes will not fit in the narrow bit lane of this insert, which is 29mm wide.
• External dimensions: 394mm x 300mm x 100mm high
• There is ~7mm of clearance on top of the insert to store boards, rulebooks, etc.
• This insert has 1485mm of card lane storage.  It can store ~4950 unsleeved cards or ~2970 Mayday Premium sleeved cards (.50mm per card) or ~2750 Ultra Pro Deck Protector sleeved cards (.54mm per card).  Keep in mind each acrylic divider will also use 3mm of card lane space.  The values used for the card thickness estimate = .3mm.
• Recommended sleeves include Ultra Pro Deck Protector, Mayday Premium, Mayday Euro, Dragon Shield (snug, no spare room width-wise), FFG Standard, FFG Euro, etc.
• This insert is constructed of HDF (wood product) and is natural colored. HDF does not contain a wood grain as it is a constructed wood product.
• Includes fifteen (15) clear acrylic dividers (model MULT-DIV-001). Additional divider packs of type MULT-DIV-001 should be used.
• Insert assembly requires some wood glue and about 15 minutes of assembly time. We recommend Sobo Craft glue or another comparable quick setting, tacky glue.
• Artist Sketch Case not included!

Release Notes

v4

• initial release.
• 2.286mm acrylic dividers

v20

• v20 supports 3mm acrylic dividers