This organizer is designed to fit inside the versatile Artist Sketch Case available from Hobby Lobby in the United States. Our ASB-001 organizer provides storage for cards in a horizontal configuration and includes 15 acrylic dividers. This case differs from other ASB organizers in that it requires the flip-out storage shelf to be kept in the case due to the low-profile nature of the design. This shelf is often used to store game manuals, books, and boards.
This organizer is great for inexpensively storing large volumes of standard-sized cards from games such as:
- and the list goes on…
You will want to measure your cards or cards+sleeves. As noted below, the card lanes are 94.5mm wide. Your cards should be a maximum of 94mm tall (sleeved).
The Artist Sketch Case is famous for being inexpensive. It is also famous for having wildly different interior sizes. This organizer has been designed to support the smallest size case interiors that we have found or been informed of by customers. In some cases this means that the organizer will be smaller than the interior offered by your case and may slide around a bit when handled. A small amount of movement in the case should be fine, but you can always optionally drop some glue on the bottom of the case and glue the organizer into the case to eliminate any movement.
- This v20 design supports 3mm acrylic dividers. Units shipped prior to March 24, 2020 support 2.286mm dividers.
- This insert measures 70mm high and provides four (4) organizational lanes for horizontal card storage. This insert is meant to be used with the swing-out compartment still inside the case. The compartment provides extra storage for rules and boards, and stabilizes the cards and dividers no matter how crazily you swing the case around. Just don’t let go…
- External dimensions: 394mm x 300mm x 70mm high
- Lane width: 94.5mm
- This insert has ~1176mm of card lane storage. It can store ~3920 unsleeved cards or ~2352 sleeved cards (.50mm per card). Keep in mind each acrylic divider will also use 3mm of card lane space. The values used for the card thickness estimate = .3mm.
- This insert is constructed of HDF (wood product) and is natural colored. HDF does not contain a wood grain as it is a constructed wood product.
- Includes fifteen (15) clear acrylic dividers (model ASB-DIV-003). Additional divider packs of type ASB-DIV-003 should be used.
- Insert assembly requires some wood glue and about 15 minutes of assembly time. I recommend Sobo Craft glue or another comparable quick setting, tacky glue.
- Artist Sketch Case not included.
- initial release
- 2.286mm acrylic dividers
v20: March 24, 2020
- v20 supports 3mm acrylic dividers